|Product Name:||Optic Fiber Adapter Board||Use:||MPO/MTP-LC Pre-terminated Module Box|
FC fiber optic patch panel 12 port,
lc fiber optic patch panel 12 port,
12 Port LC adapter panel
Fiber Optic Adapter Panel Lc Fc Sc Fiber Optical Patch Panel Accessories
The MPO/MTP-LC pre-terminated module box is mainly used to branch the 12-core MPO connector of the main optical cable terminal into a dual-core conventional connector. The specific feature is that the front end of the module box is an LC adapter (flange) port, generally 12 duplex or 6 quad adapters are used, and two MPO or MTP adapters are installed on the back. The module box is a patch cord, which directly connects the front panel LC duplex adapter (flange) with the back MPO or MTP adapter into a whole. Each independent MPO/MTP-LC pre-terminated module box is placed in the optical fiber distribution frame to form a complete MPO/MTP-LC optical fiber distribution frame (box).
1. Convert the 12-pin MPO/MTP connector branch to an LC duplex connector;
3. The front panel is equipped with an LC adapter, and the rear panel is equipped with an MPO/MTP adapter;
5. All ports are marked on the front end, which is easy to identify and search.
■ Through factory termination and testing, the system transmission performance and wiring quality can be greatly improved;
■Based on modular design, quick connection of system components can be realized, greatly reducing on-site construction costs; and rapid recovery of system failures.
■When the data center is upgraded and changed, the pre-termination system can reduce the risk brought by the movement;
■Its high-density feature will also greatly save cabinet space, which will help reduce the energy consumption of the data center;
■Strong versatility, easy to upgrade to the next generation of optical fiber wiring system in the future.
MPO adapter, including key up-key down, key up-key up.
Parameter value Insertion loss (dB) <0.7 500 plug-in/out changes (dB) <0.3 Operating temperature (℃) -40 ～ 85 Storage temperature (℃) -40 ～ 85
MPO-LC/SC pre-terminated sector fiber means that one end uses an MPO single-head 12-core or 24-core connector, and the other end uses an LC/SC connector. This product is mainly used in the pre-end module box, connecting the pre-end backbone optical cable and the jumper between the equipment, making it modular and plug-and-play. Compared with traditional welding, it greatly improves the convenience and efficiency of work. .
The length of the customized jumper wire can be matched with the module box, which is convenient for fiber winding.
There are mainly two types of MPO backbone optical cables: 1. MPO-MPO backbone optical cables; 2. MPO-LC/SC/FC sector branch backbone optical cables;
■ MPO backbone optical cable numbering rules (each space represents one digit):
■ Each MPO pre-terminated optical cable contains 12-core optical fiber, which can be connected to the 12-core optical fiber in one plug and unplug;
■ The optical cable adopts a round double-layer reinforced sheath structure, which overcomes the problem of bending sensitivity, has higher strength, and is convenient for construction and deployment.
■ Use sheath and pull ring to facilitate construction and provide protection for plugs during wiring;
■ Currently, we can provide 62.5/125μm (OM1) standard multimode fiber, 50/125μm laser optimized 10 Gigabit (OM3) multimode fiber, and low water peak single-mode fiber pre-terminated products.
■ The end face of the MPO plug has two structures: male and female, which can be selected according to actual conditions.
Contact Person: gapho