Think what the customer thinks, do what the customer needs, and serve the customer
|Place of Origin:||China|
|Model Number:||19 Inch Cable Rack|
|Minimum Order Quantity:||10|
|Delivery Time:||7-10 day|
|Chassis Size:||484.4 * 69.2 * 44.5mm||Working Voltage:||20V|
|Scope Of Application:||Optical Fiber Welding|
19 Inch Cable Management Frame,
20V Cable Management Panel
Fiber Optic Adapter Panel 19 Inch Cable Rack
The cable will not turn at right angles for many times before being pressed into the module, which reduces the signal radiation loss of the cable itself and the radiation interference to the surrounding cables. Since the line manager enables the horizontal twisted pair to enter the module regularly and in parallel, when the line is expanded in the future, a large number of cables will not be changed due to changing one cable, so as to ensure the overall reliability, that is, improve the scalability of the system.
Detailed introduction of 19 inch cable rack
The cable management rack can be installed at the front end of the rack to provide horizontal cable management of wiring or equipment jumpers; When installing the cable management rack, the cable shall be managed naturally according to the cable direction to form an easy to maintain system.
The cable management frame, also known as the cable manager, is usually used together with the distribution frame to manage various jumpers used for jumping on the front panel of the distribution frame. Because all kinds of jumpers have a certain weight, they will sag naturally after jumping to the interface of the distribution frame module. If the connection point is stressed for a long time, it will cause poor contact of the interface and cause network failure. Therefore, in the past projects, wire binding and fixation are often used to reduce the tension of the cable on the RJ-45 module. This may be applicable in some regions and situations, but it does not solve the fundamental problem. The cable management rack can hold the cable flat so that the cable does not exert force on the module, which essentially solves this long-standing problem.
In addition, the cable management rack holds up the cable, and the jumper connector enters the RJ-45 module horizontally, so that the cable will not turn right angle before inserting into the module, which reduces the loss of its own signal and the radiation interference to the surrounding cables.
Contact Person: gapho