|
Product Details:
|
| Wavelength Range: | 1260～1620 | Testing Wavelength: | 1310/1490/1550/1625/1650 |
|---|---|---|---|
| Insertion Loss: | Typ:0.7 ,Max:1.2 | Return Loss: | ≥50 |
| Crosstalk: | ≥50 | Application: | FTTH FTTB FTTX Network |
| Connector: | 1000Mbps RJ45 Port | Fiber Port: | Support SC |
| Name: | 2x1 Optical Switch With Redundancy | Operation Temperature: | -5～+70 |
| Storage Temperature: | -40～+85 | ||
| High Light: | FTTH MEMS Optical Switch,FTTB MEMS Optical Switch,MEMS Fiber Optic Switch |
||
MEMS1×4 Optical Switch
The MEMS Latch Series 1x4 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS configuration and activated via an electrical control signal. It uniquely features rugged thermal activated micro-mirror movements instead of rotation, and latches to preserve the selected optical path after the drive signal has been removed. This novel design significantly reduces packaging requirement, and simplifies driving electronics, offering unprecedented high stability as well as an unmatched low cost.
Features
• High Reliability
• Latching
• Intrinsic tolerance to ESD
Applications
• Channel Blocking
• Configurable Add/Drop
• System Monitoring
• Instrumentation
◇ Performance
| Parameters | MSW-1×4 | |
| Wavelength Range | nm | 1260～1620 |
| Testing Wavelength | nm | 1310/1490/1550/1625/1650 |
| Insertion Loss | dB | Typ:0.7 ,Max:1.2 |
| Return Loss | dB | ≥50 |
| Crosstalk | dB | ≥50 |
| PDL | dB | ≤0.10 |
| WDL | dB | ≤0.25 |
| TDL | dB | ≤0.20 |
| Repeatability | dB | ≤±0.05 |
| Repeatability Rate | Hz | 20 |
| Lifetime | Cycle | ≥109 |
| Switch Time | ms | ≤5 |
| Transmission Power | mW | ≤500 |
| Operation Temperature | ℃ | -5～+70 |
| Storage Temperature | ℃ | -40～+85 |
| Switching type | Latching | |
| Dimension | mm | (L)26×(W)22×(H)9.4(±0.2) |
◇ Electrical Driving Requirements
| Optical Path | Pin 1 | Pin 2 | Pin 3 | Pin 4 | Pin 5 | Pin 6 | Pin 7 | Pin 8 |
| Comm↔Port 1 | DP* | NC | NC | DP | NC | DP | GND | |
| Comm↔Port 2 | NC | DP | DP | NC | NC | DP | ||
| Comm↔Port 3 | NC | DP | NC | DP | DP | NC | ||
| Comm↔Port 4 | NC | DP | NC | DP | NC | D | ||
* DP: Driving Pulse Voltage.
| Driving Pulse | Min | Typical | Max | Unit |
| Pulse voltage | 9 | 9.3 | 9.5 [4] | V |
| Pulse width | 12 | 12.5 | 13 [4] | ms |
| Peak current | 290 | mA |
◇ Dimensions
◇ Ordering Information:MSW－1×4－A－B－C－D－E
| A | B | C | D | E |
| Mode | Wavelength | Fiber Diameter | Fiber Length | Connector |
|
SM:9/125um M5: 50/125um M6: 62.5/125um
|
85: 850nm 13: 1310nm 14: 1490nm 15: 1550nm 162: 1625nm 165: 1650nm 13/15:1310/1550nm |
25:250um 90:900um |
05:0.5m 10:1.0m 15:1.5m |
OO:None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC LP: LC/PC LA: LC/APC |
Contact Person: gapho
Tel: +8618924585948
