Fiber 1x1 Mechanical Optical Switch SM 1260-1620nm For Channel Blocking

       1x1 Mechanical Optical Switch 1260~1620(SM),850(MM),for Channel Blocking,Configurable Add/Drop,instrumentation

   Description:

    The 1x1 fiber optic switch connects optical channels by directing or blocking an incoming optical signal into the output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal.A latching version preserves the selected optical path after the drive signal has been removed, while the non-latching versions default to either the open or closed state when power is removed. The switch has integrated electrical position sensors.The new material based advanced design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as unmatched low cost.

Application

• Channel Bloking
• Configurable Add/Drop
• System Monitoring
• Instrumentation

Features

• Unmatched Low Cost
• Low optical distrotions
• High isolation
• high relaibility
• Epoxy-free Optical Path

Specification

 

Parameters	Specifications	Unit
Operating Wavelength	1260~1620(SM),850(MM)	nm
Insertion Loss	≤0.6	dB
Wavelength Dependent Loss	≤0.25	dB
Polarization Dependent Loss	≤0.05	dB
Temperature Dependent Loss	≤0.25	dB
Return Loss	SM≥55 MM≥35	dB
Cross Talk	SM≥50 MM≥35	dB
Switch Time	≤8	ms
Repeatability	≤±0.02	dB
Durability	≥107	times
Operating Voltage	3 or 5	V
Switch Type	Non-Latching/Latching
Operating Temperature	－20~＋70	℃
Storage Temperature	－40~＋85	℃
Optical Power	≤500	mW
Dimension	27.0L×12.0W×8.2H	mm

 

Pin configurations

Type	Optical Path	Electric Drive				Status Sensor
1×1		Pin 1	Pin 5	Pin 6	Pin 10	Pin 2-3	Pin 3-4	Pin 7-8	Pin 8-9
Latching	Non‐light	--	--	GND	V＋	Close	Open	Open	Close
	P1-P2	V＋	GND	--	--	Open	Close	Close	Open
Non-Latching	Non‐light	--	--	--	--	Close	Open	Open	Close
	P1-P2	V＋	--	--	GND	Open	Close	Close	Open

 

Mechanical Dimensions(Unit:mm)

 

 

 

Optical Route